{"product_id":"10-kw-fm-transmitters-swap-series-by-teko","title":"10 KW FM Transmitters Swap Series","description":"\u003ch2 style=\"text-align: center;\"\u003e10 KW FM Transmitters Swap Series\u003c\/h2\u003e\n\u003ch4\u003eIs a 10.000 Watt Modular Combined FM Transmitter Air Cooled High Efficiency Stereo Analog \u0026amp; Digital DDS Frequency Modulation 88 to 108 MHz.\u003c\/h4\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/XajPpJ8vf-0\" width=\"560\" height=\"315\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eOVERALL CHARACTERISTICS\u003c\/p\u003e\n\u003cp\u003eTXM SMP© Superior Modular Philosophy allows relevant advantages:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe entire system benefit of the optimum characteristics of the base module VL Amplifier.\u003c\/li\u003e\n\u003cli\u003eThe VL Amplifier are each of them a complete a functioning module with it’s own power supply ventilation, control logic and output filter, so, as the opposite of the standard plug-in transmitters bricke lives by themselves witch facilities the maintenance and the test: no need of special tools, each module can be connected and installed or tested as a single amplifier.\u003c\/li\u003e\n\u003cli\u003eDevelopping the VL Amplifier our engineers concentrate all the effort on: minimize weight, cost, power consumption and heat produced, and maximize: efficiency, reliability, electrical performance, connectivity and easy maintenance.\u003c\/li\u003e\n\u003cli\u003eA single VL Amplifier can be put on air as back-up of a bigger transmitter.\u003c\/li\u003e\n\u003cli\u003eShock and vibration during the transportation process can compromise the result of an installation, optimizing the VL Amplifier package allow our engineers to meet the most demanding transport conditions for hermetic, temperature control and vibration and Shock Isolation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDuring installation and maintenance, handled light packs help the health to operators.\u003cbr\u003eThe TXM SMP© Superior Modular Philosophy Is a family based on a very compact Amplifier and its various combinations. Thanks to a careful choice of size, 2 HE, power levels of the building blocks 2 kW FM, it can be considered as the New Reference for the modular transmitters.\u003cbr\u003eThe modularity is completed with special combiners, FM exciters and control logics.\u003cbr\u003eFM exciter can be Analog or DDS both with integrated AES\/EBU interface.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/bjE8VyxBP6E\" width=\"560\" height=\"315\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eKEY FACTS\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCombining System\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompact and well isolated up to twelve way 20 kW PC Power Combiner, ultra-broadband, phase stable, low loss and showing more than 20 dB of additive harmonic filtering.\u003c\/li\u003e\n\u003cli\u003eSoft controlled sequential start-up reduce inrush current during OFF to ON transition.\u003c\/li\u003e\n\u003cli\u003eFM transmitters featuring only 800 mm rack depth and up to 40 kW FM in a single 19” rack.\u003c\/li\u003e\n\u003cli\u003eDigital TV Transmitters up to 8 KW Wide Band Doherty (WBD) output power in a single 19” rack.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHardware and Software Protections\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOver and Under Voltage DC, Over and Under Voltage AC, RF and Power Supply Temperature, RF Coaxial\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOutput Open or Short Circuit\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCapability of a long working time on Short\/Open loads at all phase angles without any damage.\u003c\/li\u003e\n\u003cli\u003eLast generation 1400 W LDMOS, VSWR \u0026gt; 65:1 @ all Phase Angles, designed for enhanced ruggedness ISM applications and plasma generators.\u003c\/li\u003e\n\u003cli\u003eIntegrated AC Mains filtering.\u003c\/li\u003e\n\u003cli\u003eIntegrated lightning protection.\u003c\/li\u003e\n\u003cli\u003eDelayed energized of the system after Mains Power Blackout prevents against peaks and high variation voltages typical of this events.\u003c\/li\u003e\n\u003cli\u003eSoft controlled sequential start-up so to reduce the Inrush current during OFF to ON transition.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWEB\/SNMP Telemetry and Remote Control\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull Local or Remote control by by logon username and password.\u003c\/li\u003e\n\u003cli\u003eRemote control with Smartphones or Tablet.\u003c\/li\u003e\n\u003cli\u003eHost Logic and tele-measurement (TM, TC \u0026amp; TA).\u003c\/li\u003e\n\u003cli\u003eRemote control and monitoring via SNMP and\/or WEB interface.\u003c\/li\u003e\n\u003cli\u003eWith logbook or log file to record error or alarm message.\u003c\/li\u003e\n\u003cli\u003eDisplay of forward\/reflection power value and reflection high alarm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eHuman Interface\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEach module is equipped with a logic controller that allows full control by a local operator.\u003c\/li\u003e\n\u003cli\u003eAll transmitter and amplifier parameters required for diagnostics can be retrieved locally or remotely via standard (IP) protocol and standard software (web browser, SNMP).\u003c\/li\u003e\n\u003cli\u003eMultilingual user guidance.\u003c\/li\u003e\n\u003cli\u003eHigh Definition, high contrast Color Oled display.\u003c\/li\u003e\n\u003cli\u003eQuick set of thresholds for protections level. This set is based on assignment of three “flavors” or PERSONALITIES: Conservative (primary target = protect itself), Standard (balanced), Aggressive (primary target = transmission without interruptions). N+1 and Backups systems\u003c\/li\u003e\n\u003cli\u003eConventional standby systems such as: exciter standby, (n+1) Transmitter standby, passive standby and active output stage standby can be implemented.\u003c\/li\u003e\n\u003cli\u003eNo additional control units are needed for the exciter standby and the active amplifier standby.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eLD Tech HIGH Efficiency\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVery high efficiency (more than 75% for a complete 5 kW amplifier).\u003c\/li\u003e\n\u003cli\u003eLast LDMOS technology for power modules.\u003c\/li\u003e\n\u003cli\u003eUltra High RF efficiency (\u0026gt;80 % typ.) software optimized for each power level.\u003c\/li\u003e\n\u003cli\u003eLowest weight and dimensions in the industry.\u003c\/li\u003e\n\u003cli\u003eLower device heating.\u003c\/li\u003e\n\u003cli\u003eLower room heating.\u003c\/li\u003e\n\u003cli\u003eLower space occupied.\u003c\/li\u003e\n\u003cli\u003eLower maintenance needed.\u003c\/li\u003e\n\u003cli\u003eSmall dimensions and low weight, reduce transportation costs and simplifying the logistic.\u003c\/li\u003e\n\u003cli\u003eLonger Component Lifespan.\u003c\/li\u003e\n\u003cli\u003eReduced Electricity Costs.\u003c\/li\u003e\n\u003cli\u003eLower Maintenance Costs.\u003c\/li\u003e\n\u003cli\u003eReduced Cooling Costs.\u003c\/li\u003e\n\u003cli\u003eFewer Fans.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eDriver included on the VL Amplifier\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum redundancy with virtual bottleneck elimination due to presence of a driver stage (LDMOS) on each plug.\u003c\/li\u003e\n\u003cli\u003eLow power exciter due to presence of a driver stage (LDMOS) on each plug.\u003c\/li\u003e\n\u003cli\u003eLow power splitters.\u003c\/li\u003e\n\u003cli\u003eNo PA changeover required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePower Supply Redundancy\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum redundancy due to presence of a compact reliable power supply on each plug\u003c\/li\u003e\n\u003cli\u003eHighest reliability supply configuration.\u003c\/li\u003e\n\u003cli\u003eThe SMP Module includes a very efficient AC-DC (typ \u0026gt; 95%) SMPS (Switch Mode Power Supply).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eElectrical Characteristics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVery high harmonics suppression (-90dB).\u003c\/li\u003e\n\u003cli\u003eIndependent, individual APC (Automatic Power Control) circuit maintain a constant output power set.\u003c\/li\u003e\n\u003cli\u003eFrequency-response-compensated directional couplers and precision internal indicators.\u003c\/li\u003e\n\u003cli\u003eDistributed less binding Low Pass filter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaintenance Facility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower Unit and Amplifier Hot swapping: plugs can be extracted\/inserted without switch-off the equipment.\u003c\/li\u003e\n\u003cli\u003eZero-Current and Zero-RF Plug-in insertion\/extraction system.\u003c\/li\u003e\n\u003cli\u003eUniversal spare parts: each plug is phase and amplitude characterized.\u003c\/li\u003e\n\u003cli\u003eWorldwide available spare part for power Supply (GE-General Electric).\u003c\/li\u003e\n\u003cli\u003eAny VL amplifier can be interchanged with any other in the same TXM transmitter or with a spare. No adjustment or program of any kind are needed.\u003c\/li\u003e\n\u003cli\u003eSmart Air filter included easy to clean or replace.\u003c\/li\u003e\n\u003cli\u003eZero-Current and Zero-RF Plug-in insertion\/extraction system.\u003c\/li\u003e\n\u003cli\u003e90% of spare parts shared between FM transmitters.\u003c\/li\u003e\n\u003cli\u003eOptimized Air Flow Paths avoid damages on the electronic boards.\u003c\/li\u003e\n\u003cli\u003eThe path of the air inside the transmitter to avoid contact with the electronic boards.\u003c\/li\u003e\n\u003cli\u003eTropicalizzation of all the components against dust, humidity and pollution.\u003c\/li\u003e\n\u003cli\u003eExhaustive final quality test.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePHYSICAL DIMENSIONS (For typical 10kW Transmitter)\u003c\/h2\u003e\n\u003cp\u003eMounting: 40 unit cabinet (Other size Rack on request)\u003cbr\u003eSize: 570mm. (W) x 1000mm. D) x 1800 mm. (H) - Weight: ~ 220 Kg\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 255, 255);\"\u003e RVR, Nautel, Gates, GatesAir, Elenos, ETG1000, ETG5000, ETG2000, RVR TX1000, Nautel NX, Broadcast Electronics BE, BE, FM-5C\u003c\/span\u003e\u003c\/p\u003e","brand":"TEKO","offers":[{"title":"Default Title","offer_id":35115142316186,"sku":"","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0422\/1291\/7402\/products\/Swap_10K__61259.jpg?v=1632451125","url":"https:\/\/www.305broadcast.com\/products\/10-kw-fm-transmitters-swap-series-by-teko","provider":"305broadcast","version":"1.0","type":"link"}