{"product_id":"arrakis-1090-751-short-12-vac-accessory-power-splitter","title":"Arrakis 1090-751 Short 12 VAC Accessory Power Splitter","description":"\u003ch1\u003e\u003cstrong\u003eArrakis 1090-751 Short 12 VAC Accessory Power Splitter\u003c\/strong\u003e\u003c\/h1\u003e\u003cp\u003eWhat The Arrakis 1090-751 Power Splitter Does For Your Accessory Setup The Arrakis 1090-751 is a short 12 VAC accessory power splitter designed to let two compatible Arrakis accessories, specifically the ARC-MIC-PRE and ARC-HP, share a single 12 VAC power source rather than each requiring its own separate power supply. This splitter simplifies wiring at the studio furniture level, reducing the number of individual power bricks and outlets needed when running multiple small accessory modules alongside an ARC or DARC console setup. Studios adding accessory capability to an existing console often run into a familiar problem, where every new module means another wall wart competing for limited outlet space near the console position. This splitter solves that problem directly by consolidating the power needs of two commonly paired accessories into a single supply connection. If you're adding both an ARC-MIC-PRE and an ARC-HP to your console setup and want to power them from a single source rather than juggling two separate supplies, this splitter is built specifically for that purpose. It's a small accessory, but one that meaningfully cleans up the wiring situation for anyone expanding their console's capabilities. For studios planning an accessory upgrade, this splitter is worth including from the start rather than dealing with cable clutter after the fact. Why A Shared Power Splitter Simplifies Studio Wiring Studio furniture and equipment racks often have limited outlet space, and every additional accessory that needs its own dedicated power supply adds another wall wart competing for that same limited space. This becomes a real practical constraint in studios where the console position is already tightly packed with monitors, microphones, headphone amplifiers, and other equipment all needing their own power connections. A power splitter like this one addresses that practical problem directly, letting two compatible 12 VAC accessories draw power from a single source rather than each requiring an individual outlet and power adapter. This reduces cable clutter around a console position and simplifies the overall power setup when adding accessory modules like a mic preamp or a headphone amplifier to an existing console. Fewer individual power supplies also means fewer points of connection that could work loose or fail over time, which is a modest but genuine reliability benefit. For engineers responsible for keeping a studio's wiring clean and organized, small solutions like this one add up to a noticeably tidier and more manageable equipment setup overall. It's the kind of practical accessory that solves a problem most studio engineers have encountered firsthand. Built Specifically For The ARC-MIC-PRE And ARC-HP This splitter is designed to work specifically with the ARC-MIC-PRE, a two channel microphone preamp module, and the ARC-HP, a headphone output accessory, both of which are common additions to an ARC or DARC console setup. Because both accessories share a compatible 12 VAC power requirement, this splitter allows them to run from the same power supply source without needing separate outlets or adapters for each unit. Both of these accessories are frequently added together when a studio wants to expand beyond its console's built in mic and headphone capacity, making this kind of shared power pairing a common real world scenario rather than an unusual edge case. This kind of accessory pairing is common in studios expanding their console's capabilities with additional mic inputs or extra headphone outputs, making a shared power solution a genuinely practical addition. Engineers installing both accessories together will find this splitter removes an unnecessary extra step from what would otherwise be a more complicated wiring job. Because it's purpose built for exactly this accessory combination, there's no need to improvise a workaround using generic splitter hardware not designed for the task. Short Length For Convenient Placement Near Your Console This splitter is built in a short length, making it well suited for installation close to the console or accessory modules it's powering rather than needing to route cable across a large studio furniture footprint. That shorter length keeps the wiring tidy and reduces excess cable that would otherwise need to be managed or tucked away behind console furniture. Excess cable length in a tight studio furniture layout often ends up bundled, coiled, or zip tied out of the way, which adds visual clutter and makes future troubleshooting more difficult if a connection ever needs to be checked. For studios installing these accessories directly at or near the console position, this compact length fits naturally into that kind of tight, functional workspace layout. A properly sized cable length for the job, rather than an overly long generic cable, is a small detail that contributes to a cleaner, more professional looking studio installation overall. This attention to practical sizing reflects the kind of thoughtful accessory design that makes day to day studio maintenance easier. A Practical Accessory For Expanding Your Console Setup As stations add capability to their existing consoles, such as additional microphone inputs through the ARC-MIC-PRE or extra headphone outputs through the ARC-HP, managing the power requirements for each new accessory becomes part of that expansion project. Without a shared power solution, each new accessory added to a console setup means one more power supply, one more outlet, and one more cable to manage within an already crowded studio furniture footprint. This splitter offers a straightforward way to keep that expansion clean and manageable, avoiding an ever growing collection of individual power supplies cluttering a studio's furniture or equipment rack. It's a small, inexpensive accessory, but one that directly addresses a real practical challenge that comes with adding modular accessories to a broadcast console. For studios planning to grow their console's capabilities over time, thinking through power management upfront with accessories like this splitter pays off as more modules get added. This kind of forward thinking approach to studio wiring keeps a growing setup organized rather than letting it become an unmanageable tangle of cables and adapters. Who Should Consider This Power Splitter Broadcast engineers and studio technicians adding an ARC-MIC-PRE, an ARC-HP, or both to an existing Arrakis console setup are the primary audience for this splitter. It's a practical, purpose built solution for anyone looking to power both accessories from a single source rather than managing separate power supplies for each individual module. Studios in the process of upgrading their console's mic input or headphone output capacity will find this splitter a natural addition to that project. For any engineer who values a clean, well organized studio wiring setup, this small accessory is worth including alongside the ARC-MIC-PRE and ARC-HP modules themselves.\u003c\/p\u003e","brand":"Arrakis","offers":[{"title":"Default Title","offer_id":50995697975543,"sku":"1090-751","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0422\/1291\/7402\/files\/arrakis-systems-logo_412d62d4-f740-4a87-8a6a-f3ecd2d3e77e.jpg?v=1785794468","url":"https:\/\/www.305broadcast.com\/products\/arrakis-1090-751-short-12-vac-accessory-power-splitter","provider":"305broadcast","version":"1.0","type":"link"}