{"product_id":"arrakis-1090-752-short-48-vdc-phantom-power-splitter","title":"Arrakis 1090-752 Short 48 VDC Phantom Power Splitter","description":"\u003ch1\u003e\u003cstrong\u003eArrakis 1090-752 Short 48 VDC Phantom Power Splitter\u003c\/strong\u003e\u003c\/h1\u003e\u003cp\u003eWhat The Arrakis 1090-752 Phantom Power Splitter Does For Your ARC-MIC-PRE The Arrakis 1090-752 is a short 48 VDC phantom power splitter designed specifically for use with the ARC-MIC-PRE, Arrakis's two channel microphone preamp module. Because the ARC-MIC-PRE requires its own separate ARC-48V phantom power supply to operate condenser microphones, this splitter helps distribute that 48 VDC phantom power correctly to the module, simplifying the wiring setup for engineers adding condenser mic capability to their console. Studios adding condenser microphones to their setup often discover that phantom power requires its own dedicated wiring path separate from the standard audio signal chain, and getting that wiring right matters for reliable mic performance. This splitter takes the guesswork out of that process by providing the correctly designed connection point specifically for the ARC-MIC-PRE's phantom power needs. If you're installing an ARC-MIC-PRE with condenser microphones and need the correct phantom power splitter to complete that setup, this is the exact accessory built for that purpose. It's a small part of a larger installation, but one that's essential to getting condenser mics working properly through this preamp module. For engineers planning this kind of mic upgrade, including this splitter in the initial parts order avoids a frustrating discovery partway through installation that a critical piece is missing. Why Phantom Power Splitting Matters For Condenser Microphones Condenser microphones require 48 volts of phantom power to operate, which is a different power requirement entirely from the standard audio signal path running through a console or preamp. Unlike dynamic microphones, which generate their own signal without external power, condenser mics rely on this phantom power to charge their internal capacitor element and power their built in preamp circuitry. The ARC-MIC-PRE is specifically designed to accept this 48 VDC phantom power from a dedicated ARC-48V supply rather than drawing it from the console itself, keeping the phantom power circuit properly isolated and correctly regulated for condenser mic use. This design choice keeps the console's own power system separate from the phantom power circuit, which is a sound engineering practice that avoids potential interference or loading issues between the two systems. This splitter plays a role in that setup by properly distributing the 48 VDC supply to where it's needed on the ARC-MIC-PRE module, ensuring the phantom power reaches the mic preamp circuitry correctly. Getting this distribution right is what allows condenser microphones connected through the ARC-MIC-PRE to function exactly as intended, with clean, properly regulated phantom power reaching the mic capsule. Without this correctly configured splitter, phantom power delivery to the module simply won't work as designed. Built Specifically For The ARC-MIC-PRE Module This splitter is purpose built to work with the ARC-MIC-PRE specifically, rather than being a generic phantom power accessory intended for broader use. Because the ARC-MIC-PRE's phantom power requirements are tied directly to its two channel preamp design, using a properly matched splitter avoids any wiring guesswork when setting up condenser microphone capability on this module. Attempting to substitute a generic phantom power splitter not designed for this specific module risks introducing wiring mismatches that could prevent proper phantom power delivery or, in a worst case, cause damage to the preamp circuitry. Engineers installing an ARC-MIC-PRE for the first time, or expanding an existing installation with additional condenser mic channels, will find this splitter is the correct accessory to include alongside the required ARC-48V phantom power supply. Because it's purpose built for this exact application, there's no need to consult wiring diagrams or improvise a workaround using generic splitter hardware. This kind of factory matched compatibility removes an entire category of potential installation headaches for engineers unfamiliar with the specific phantom power requirements of this module. Short Length For Practical Installation This splitter is built in a short length, making it well suited for installation close to the ARC-MIC-PRE module itself rather than requiring a long cable run across studio furniture. That shorter length keeps the wiring tidy at the point of installation, reducing excess cable that would otherwise need to be managed or tucked away behind console furniture or equipment racks. Excess cable length in a compact studio installation often ends up bundled or zip tied out of sight, which adds unnecessary clutter and makes future troubleshooting more difficult if a connection ever needs to be checked. For studios installing the ARC-MIC-PRE directly at or near the console position, this compact length fits naturally into that kind of tight, functional workspace layout without adding unnecessary cable clutter. A properly sized cable for the specific job, rather than an overly long generic length, reflects the kind of thoughtful accessory design that makes studio installation and ongoing maintenance easier. This attention to practical sizing is a small but meaningful detail in an otherwise straightforward accessory. Where This Splitter Fits Into A Condenser Mic Setup Setting up condenser microphones with the ARC-MIC-PRE requires both the separate ARC-48V phantom power supply and the proper distribution of that power to the preamp module itself, which is exactly the role this splitter plays. Without correctly distributed phantom power, a condenser microphone connected through the ARC-MIC-PRE simply won't function, since it depends entirely on that 48 volt supply to operate its internal electronics. This makes the splitter a genuinely required component of the overall setup rather than an optional add-on, since skipping it leaves the phantom power path incomplete regardless of how correctly everything else is wired. Engineers planning a full condenser mic installation with the ARC-MIC-PRE should think of the ARC-48V supply and this splitter as a matched pair, both necessary to get a functioning phantom power circuit. This splitter is a small but essential link in getting a condenser mic setup working correctly alongside the ARC-MIC-PRE module. Understanding exactly where this component fits into the larger phantom power chain helps engineers avoid overlooking it during the initial parts ordering process. A Necessary Accessory For Condenser Mic Installations For any studio adding condenser microphones through the ARC-MIC-PRE, this splitter is a required part of that installation rather than an optional convenience item. It's a small, inexpensive accessory, but one that's directly necessary for getting phantom power properly routed to the preamp module, meaning the installation simply won't function correctly without it. Engineers planning a condenser mic installation with the ARC-MIC-PRE should include this splitter alongside the ARC-48V phantom power supply when placing their order, rather than treating it as an afterthought to add later. Overlooking this splitter during initial procurement can lead to a frustrating delay once installation begins and the missing piece becomes apparent. Because it's such a low cost item relative to the rest of a condenser mic setup, there's little reason not to include it from the start of any project involving the ARC-MIC-PRE. For any engineer specifying parts for this kind of upgrade, treating this splitter as a standard, non-negotiable line item is the correct approach. Who Should Order This Phantom Power Splitter Broadcast engineers and studio technicians installing condenser microphones through the ARC-MIC-PRE module are the primary audience for this splitter. It's a necessary, purpose built accessory for that specific installation, and it should be ordered alongside the ARC-48V phantom power supply whenever a studio is setting up condenser mic capability through this preamp module. Studios in the process of adding mic channels or upgrading existing mic capability to support condenser microphones specifically should treat this splitter as a standard part of that parts list. For any engineer unfamiliar with the ARC-MIC-PRE's specific phantom power requirements, ordering this splitter alongside the module and its required power supply is the simplest way to ensure a fully functioning condenser mic setup from day one.\u003c\/p\u003e","brand":"Arrakis","offers":[{"title":"Default Title","offer_id":50995698041079,"sku":"1090-752","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0422\/1291\/7402\/files\/arrakis-systems-logo_6f63984d-e7e7-4027-bc84-c101d1f6fbfb.jpg?v=1785794474","url":"https:\/\/www.305broadcast.com\/products\/arrakis-1090-752-short-48-vdc-phantom-power-splitter","provider":"305broadcast","version":"1.0","type":"link"}