{"product_id":"arrakis-arc-hyb-premade-cable","title":"Arrakis ARC-HYB Premade Cable","description":"\u003ch1\u003e\u003cstrong\u003eArrakis ARC-HYB Premade Cable\u003c\/strong\u003e\u003c\/h1\u003e\u003cp\u003eA Purpose Built Cable For Connecting A JK Audio Host Hybrid The Arrakis ARC-HYB is a premade cable built specifically to connect a JK Audio broadcast host hybrid to ARC-10, ARC-15, and MARC series consoles, carrying both audio and RJ45 logic signals in a single connection. Rather than wiring audio and logic control separately, this cable combines them into one purpose built connector that matches the exact pin configuration these console families expect. JK Audio hybrids are widely used in broadcast studios for handling phone calls, and pairing one with an ARC-10, ARC-15, or MARC console requires more than just an audio connection, since proper hybrid control also depends on logic signaling passing between the two devices. The ARC-HYB is designed to deliver that complete connection in one cable, so a station doesn't need to piece together a custom logic and audio wiring solution on their own. For any studio running a JK Audio hybrid alongside one of these Arrakis consoles, this cable is the direct, factory recommended way to get the two devices talking to each other correctly. Why Logic Signaling Matters For Phone Hybrid Integration A phone hybrid does more than just pass audio between a caller and the console, it also needs logic signals to properly indicate call status and coordinate control between the hybrid and the board. Without that logic connection, a station might be able to hear a caller through the console, but functions tied to call status indication or hybrid control could behave inconsistently or require manual workarounds from the hybrid's own front panel. The ARC-HYB carries RJ45 logic specifically so this coordination happens automatically as part of the cable connection rather than needing a separate wiring run. This is particularly relevant for the ARC-10, ARC-15, and MARC console families, where consistent integration between the console and connected broadcast hardware is part of what makes the studio workflow feel seamless during a live show. Getting this logic connection right from the start avoids troubleshooting further down the line when a hybrid doesn't behave the way staff expect. Built To Match Exact Console And Hybrid Pin Configurations Because the ARC-HYB is built specifically for JK Audio hybrids paired with ARC-10, ARC-15, or MARC consoles, it eliminates the guesswork that comes with generic RJ45 cabling or a custom-built connector. Audio and broadcast logic wiring standards can vary meaningfully between manufacturers, so a cable that isn't matched to the exact pin configuration can cause subtle issues that are difficult to diagnose after installation. By using a cable engineered specifically for this hybrid and console pairing, a station gets a connection that's been designed to work correctly the first time, without needing an engineer to test and adjust wiring during setup. This kind of precision matters most during a new studio build or when adding a hybrid to an existing console setup, since a mismatched cable can cause a delay that a properly matched one avoids entirely. A Practical Time Saver During Studio Installation Ordering a premade cable like the ARC-HYB is significantly faster than having station staff build a custom logic and audio cable from scratch, particularly for stations without an engineer experienced in broadcast wiring standards. Since it's manufactured to match both the console side and the JK Audio hybrid side of the connection, there's no need to test continuity, confirm pinouts, or adjust wiring after the fact. This matters most when a station is racing to get a studio operational, whether that's a brand new build or an upgrade to an existing setup that's adding hybrid functionality for the first time. For stations that already know they're pairing a JK Audio hybrid with one of these Arrakis console families, ordering this cable ahead of time avoids a wiring delay partway through installation. A Small But Essential Piece Of A Complete Phone Hybrid Setup On its own, the ARC-HYB is a modest accessory, but it plays a specific and necessary role in properly integrating a JK Audio hybrid into an ARC-10, ARC-15, or MARC based studio. Anyone planning to add call-in capability to one of these consoles should factor this cable into their equipment list from the start rather than discovering the need for it after the hybrid and console have already arrived separately. Because Arrakis offers a range of other conversion and connection cables for different equipment pairings, it's worth confirming this is the correct cable for the specific hybrid and console combination being installed. For the cost of a simple cable, it removes a real point of friction in getting phone call functionality working correctly from day one.\u003c\/p\u003e","brand":"Arrakis","offers":[{"title":"Default Title","offer_id":50995698893047,"sku":"ARC-HYB","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0422\/1291\/7402\/files\/arrakis-systems-logo_b9c04aa6-108b-4f2c-a134-a01bfa4968bc.jpg?v=1785794600","url":"https:\/\/www.305broadcast.com\/products\/arrakis-arc-hyb-premade-cable","provider":"305broadcast","version":"1.0","type":"link"}