{"product_id":"arrakis-marc-mic-cable-mono-input-cable","title":"Arrakis MARC-MIC-CABLE Mono Input Cable","description":"\u003ch1\u003e\u003cstrong\u003eArrakis MARC-MIC-CABLE Mono Input Cable\u003c\/strong\u003e\u003c\/h1\u003e\u003cp\u003eWhat This Arrakis MARC-MIC-CABLE Actually Is This is a mono input cable built to connect a standard microphone directly into the RJ45-based mic module on your MARC-15 console. Since the MARC-15 uses RJ45 connectors for its module wiring rather than traditional XLR jacks, this cable bridges that gap, giving you an XLR female connector on one end to accept a standard microphone's XLR male output, with an RJ45 male connector on the other end that plugs directly into your console's mic input module. Rather than needing custom wiring or a generic adapter, this cable gives you a purpose-matched connection specifically engineered for how the MARC-15's mic module handles microphone input. Why This Cable Matters for Connecting Microphones to Your MARC-15 Most professional microphones use a standard XLR male connector, but the MARC-15's mic module is wired for RJ45 connections as part of the console's overall cabling approach, which keeps studio wiring cleaner and more consistent across the entire board. This cable exists specifically to solve that connector mismatch, giving you a properly wired path from your microphone directly into the console's mic preamp circuitry without needing to build custom wiring or risk a mismatched connection that could introduce noise or signal issues at your mic input stage. Because this is a mono cable, it's built specifically for connecting a single microphone channel, matching how mic modules on the MARC-15 typically handle individual mic sources. How This Cable Fits Into a Typical MARC-15 Mic Setup Connecting a microphone to your MARC-15 mic module is as straightforward as plugging your mic's XLR output into the female end of this cable, then connecting the RJ45 end directly into the appropriate input on your console's mic module. Because the mic module's preamp circuitry and phantom power are already built specifically around this RJ45 wiring standard, using a cable purpose-matched to that same standard means your microphone connection works correctly from the start, without any guesswork about pin configuration or signal compatibility. This is especially important given that mic-level signals are considerably more sensitive to wiring issues than line-level connections, making a properly matched cable at this stage more important than it might be elsewhere in your signal chain. Why Purpose-Built Cabling Beats Generic Adapters at the Mic Stage Buying a cable designed specifically for this connector transition avoids the noise, wiring mistakes, and unreliable connections that can come from improvised adapters or generic cabling not built with the MARC-15's specific mic module wiring in mind. This matters even more at the microphone stage than it does elsewhere in your studio, since mic-level signals are considerably more susceptible to noise and interference than line-level audio, meaning any wiring inconsistency here gets amplified along with your actual voice signal through the rest of your console. Using a cable purpose-built for this exact connection removes that risk, giving you a clean, dependable connection from microphone to console mic module. Where This Cable Fits Into a Typical Studio Setup This cable is meant specifically for connecting a standard microphone into any mic module installed in a MARC-15 mainframe, whether that's a single mic position for a host or news anchor, or as one of several mic connections across a fully populated console configuration. It's an essential piece of hardware anytime you're wiring a new microphone into your MARC-15, whether that's during initial studio installation or when adding an additional mic position to an existing setup down the line. Who Should Be Adding This Cable to Their Studio This cable is a necessary purchase for any station running a MARC-15 console with mic modules installed who needs to connect standard microphones into that mic input. It's especially important given how sensitive mic-level connections are to wiring quality, making a purpose-built cable considerably more valuable here than it would be for a simpler line-level connection. For any facility setting up or expanding mic capacity on their MARC-15, having this correctly matched cable on hand is exactly what makes that connection work reliably from the start.\u003c\/p\u003e","brand":"Arrakis","offers":[{"title":"Default Title","offer_id":50995704070391,"sku":"MARC-MIC-CABLE","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0422\/1291\/7402\/files\/arrakis-systems-logo_32650bd5-0428-43cb-b179-7a68f7ca3e40.jpg?v=1785795048","url":"https:\/\/www.305broadcast.com\/products\/arrakis-marc-mic-cable-mono-input-cable","provider":"305broadcast","version":"1.0","type":"link"}