{"product_id":"arrakis-marc-stm-studio-monitor-module","title":"Arrakis MARC-STM Studio Monitor Module","description":"\u003ch1\u003e\u003cstrong\u003eArrakis MARC-STM Studio Monitor Module\u003c\/strong\u003e\u003c\/h1\u003e\u003cp\u003eWhat This Arrakis MARC-STM Studio Monitor Module Actually Is This is the optional Studio Monitor module for the MARC-15 console, built specifically to handle monitor and talkback communication between the control room, where your console physically sits, and a separate talk studio positioned elsewhere. Since talk studios and control rooms are frequently in different physical spaces, this module exists to bridge that gap, giving the console operator and the talent in the separate studio a genuine, reliable way to hear each other's audio and communicate directly, all managed through the same modular MARC-15 mainframe. Like every other module in the MARC platform, this slots directly into an available position in your mainframe, giving you this specific talk studio functionality only when your setup actually calls for it. How Selecting Your Studio Monitor Feed Source Actually Works The studio monitor feed on this module can be selected from either an external input, commonly the actual on-air signal itself, or from any of the console's three main buses, Program, Audition, or Utility. If the studio is currently live on air, you'd typically select either the external Air input or the Program bus, giving the talent in that room a real-time feed of exactly what's going out over the airwaves. If instead you're recording that studio's content for playback at a later time, selecting the Audition or Utility bus lets you feed that separate recording path to the studio without it needing to match whatever's actually live on air at that moment. This flexibility in feed selection matters because talk studios often serve double duty, sometimes live, sometimes prerecorded, and this module gives you the ability to switch between those use cases as needed. Why the Talk to Studio Button Enables Real Two-Way Communication Pressing the Talk to Studio button sends the control room operator's mic directly to the muted monitor feed and the unmuted headphone feed running to the separate studio, letting the operator speak directly to the host or talent without that communication going out over the air. This gives control room staff a genuine way to give direction, relay information, or communicate timing cues to talent in a separate room without disrupting whatever's actually being broadcast or recorded at that moment. On the studio side, talent can talk back to the control room operator by activating the talkback logic on their own mic module, which routes their voice to the console's cue speaker and headphones, giving you real two-way communication between the two spaces through a simple button press on either end. Why Separate Muted Monitor and Unmuted Headphone Feeds Matter This module includes stereo, active balanced audio outputs specifically split between a muted studio monitor feed and an unmuted earphone feed, giving you two distinct audio paths depending on how talent in the studio is actually listening. The muted monitor feed is meant for speaker-based monitoring in the studio, muting automatically when needed to avoid feedback issues with an open mic in the same room, while the unmuted earphone feed stays consistently active, letting talent wearing headphones hear the feed continuously regardless of the monitor's mute state. Because these are outputs rather than a complete self-contained monitoring system, you'll need external audio power amplifiers for both the studio monitor speakers and the earphone feed, since this module handles the signal routing and control logic rather than actual amplification. Why the Reed Relay Isolated On-Air Light Output Matters This module includes a studio muting logic output specifically intended to trigger an on-air light in the separate studio, letting talent know visually when they're actually live rather than relying solely on verbal cues from the control room. That output is reed relay isolated, rated at 50 milliamps maximum, specifically to eliminate the potential for ground loops between your console and whatever separate power circuit is running the on-air light in that other room. Because this reed relay output is meant to trigger another relay rather than directly powering the light itself, you'll need that intermediate relay stage set up to actually drive the light fixture, keeping your console's internal circuitry properly isolated from the external lighting circuit. How This Module Fits Into a Typical MARC-15 Talk Studio Setup Because the MARC-15 mainframe supports a maximum of one Studio Monitor module per console, this is specifically a single dedicated module for managing communication with one separate talk studio space, rather than something you'd add multiples of the way you might with mic or line modules. This module is what actually makes a genuine two-room talk studio setup functional, giving operators a reliable, professional way to manage monitor feeds, talkback communication, and on-air indication for talent who aren't physically sitting at the console itself. Who Should Be Adding This Module to Their MARC-15 Console This module is essential for any station running a talk studio physically separate from the control room where the MARC-15 console itself resides. It's particularly valuable for stations regularly switching between live and recorded content in that separate studio, given the flexibility to select different bus feeds depending on the situation, and for any setup where clear, professional talkback communication between the control room and studio talent genuinely improves show operation. For anyone building out a MARC-15 installation with a dedicated talk studio, this module is the specific component that makes that two-room workflow actually possible.\u003c\/p\u003e","brand":"Arrakis","offers":[{"title":"Default Title","offer_id":50995704365303,"sku":"MARC-STM","price":525.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0422\/1291\/7402\/files\/arrakis-systems-logo_b37831c8-addc-40d1-b606-ba17bc69ac07.jpg?v=1785795082","url":"https:\/\/www.305broadcast.com\/products\/arrakis-marc-stm-studio-monitor-module","provider":"305broadcast","version":"1.0","type":"link"}