{"product_id":"arrakis-rj45-1-8-1-rj45-male-to-1-8-wiring-cable","title":"Arrakis RJ45-1\/8-1 RJ45 Male to 1\/8 Wiring Cable","description":"\u003ch1\u003e\u003cstrong\u003eArrakis RJ45-1\/8-1 RJ45 Male to 1\/8 Wiring Cable\u003c\/strong\u003e\u003c\/h1\u003e\u003cp\u003eWhat Is The Arrakis RJ45-1\/8-1 And What It Does The Arrakis RJ45-1\/8-1 is a wiring cable built to connect a male RJ45 connector to a 1\/8-inch (3.5mm) connector, designed for use with Arrakis broadcast consoles that use balanced RJ45 connections for their audio inputs and outputs. If you're setting up a console input for a consumer-level audio source like an MP3 player, smartphone, or laptop headphone output, this cable gives you a direct way to wire that connection into your console's RJ45 input or output without needing to build a custom cable from scratch. Broadcast consoles from Arrakis rely on RJ45 connectors throughout their input and output architecture rather than the RCA or 1\/8-inch jacks typically found on consumer electronics, which means stations often need a dedicated adapter cable any time they want to bring in audio from personal devices. This cable exists specifically to solve that mismatch, giving engineers and station staff a plug-and-go option rather than requiring them to source parts and solder a custom termination every time a new consumer device needs to be connected. For stations that regularly rotate in different personal devices for interviews, playback, or production work, having a reliable, purpose-built cable on hand removes a small but recurring point of friction in daily studio operations. Built To Bridge Console I\/O With Consumer Audio Gear Arrakis consoles, including the ARC and MARC series, use RJ45 connectors for their balanced audio inputs and outputs rather than the RCA or 1\/8-inch jacks found on typical consumer audio equipment. This cable is built specifically to bridge that gap, wiring a standard RJ45 connector on one end to a 1\/8-inch connector on the other, so a console's input or output channel can connect directly to a device using a 3.5mm headphone or line jack. As Arrakis notes in its own cable documentation, \"input\" and \"output\" designations are made in reference to the console itself, so this cable is intended for a specific connection direction depending on whether it's wired to a console input or output channel. This distinction matters when ordering or installing the cable, since a cable built for feeding a source into the console isn't necessarily wired the same way as one built for sending console output to an external device. Getting this direction right during setup avoids signal issues or non-functioning connections down the line, which is why Arrakis calls out this input-versus-output framing directly in its own console accessories documentation. Simplifies Wiring For Consumer-Type Sources Rather than requiring a station's engineer to solder together a custom RJ45 termination for every consumer device connected to the console, this pre-wired cable handles that conversion directly. This is particularly useful for stations that regularly plug in personal devices, computers, or other 1\/8-inch equipped sources for on-air playback, interviews, or production work, since it removes the need for adapters or in-house cable building for that specific connection type. Smaller stations without a dedicated broadcast engineer on staff benefit especially from this kind of pre-made solution, since it eliminates a task that would otherwise require specialized soldering equipment and RJ45 wiring knowledge. Even larger facilities with in-house engineering staff often prefer to keep a stock of purpose-built cables like this one on hand, since it frees up engineering time for more complex troubleshooting rather than repeatedly building the same simple adapter cable from raw parts. Compatible With Arrakis Console RJ45 Architecture This cable is built to match the RJ45 wiring standard used across the Arrakis console lineup, making it a straightforward fit for stations already running ARC-series or MARC-series consoles. Anyone who has ordered custom wiring kits or cables for an Arrakis console setup will find this cable designed to slot directly into that same system architecture without needing modification. Because Arrakis offers a range of console accessory cables built around this same RJ45 wiring standard, stations can typically mix and match cable types as their studio's connectivity needs change, without worrying about compatibility issues between different accessory cables and their console hardware. Who This Cable Is Built For Radio stations and production studios running Arrakis broadcast consoles that need to connect consumer-level 1\/8-inch audio sources or destinations to a console's RJ45 input or output are the target audience for this cable. Anyone setting up a studio input for a phone, MP3 player, laptop, or similar 3.5mm-equipped device, or wiring a console output to a device using the same connector type, will find this cable built specifically to simplify that connection. It's especially useful for stations that frequently bring in outside contributors, guest hosts, or news staff who may want to connect a personal device for playback or recording without needing to involve station engineering staff every time. For any studio running an Arrakis console that regularly interfaces with consumer-grade audio equipment, this cable is a small but practical addition to a station's cable inventory.\u003c\/p\u003e","brand":"Arrakis","offers":[{"title":"Default Title","offer_id":50995706200311,"sku":"RJ45-1\/8-1","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0422\/1291\/7402\/files\/arrakis-systems-logo_ac74402e-3378-469a-8521-563a2bd3083a.jpg?v=1785795276","url":"https:\/\/www.305broadcast.com\/products\/arrakis-rj45-1-8-1-rj45-male-to-1-8-wiring-cable","provider":"305broadcast","version":"1.0","type":"link"}