{"product_id":"arrakis-rj45-xlr-3-cable","title":"Arrakis RJ45-XLR-3 Cable","description":"\u003ch1\u003e\u003cstrong\u003eArrakis RJ45-XLR-3 Cable\u003c\/strong\u003e\u003c\/h1\u003e\u003cp\u003eWhat This Arrakis RJ45-XLR-3 Cable Actually Is This is a single mono output cable built to connect an RJ45-terminated console or node output directly into standard XLR male-equipped equipment. Since many Arrakis consoles and Simple IP nodes use RJ45 connectors for their audio I\/O rather than traditional XLR jacks, this cable bridges that gap, letting you take a mono output from your RJ45-based system and feed it into professional gear that expects an XLR male connection. Being labeled specifically as an output cable means it's built for sending signal out of your console or node toward a destination device, rather than bringing an outside source into your system. This is a straightforward, purpose-built cable rather than a generic adapter, designed to match Arrakis's RJ45 wiring conventions on one end while giving you a standard professional connector on the other. Why RJ45 to XLR Cabling Matters in an Arrakis Studio Arrakis consoles and Simple IP nodes commonly use RJ45 connectors for their audio wiring, which keeps installation simpler and more consistent across a studio compared to running individual XLR cables for every single connection. The tradeoff is that most outboard gear, processors, amplifiers, and other broadcast equipment still expects standard XLR connections, so you need a cable specifically built to translate between the two connector types correctly. This cable handles that translation directly, with the correct pin mapping already built in, so you're not stuck trying to build custom wiring or risking a wiring mistake that could cause hum, noise, or a non-functioning connection. For anyone running an Arrakis-based system, having cables purpose-built for this exact connector transition takes the guesswork out of expanding or connecting outboard gear. Where This Cable Gets Used in a Typical Setup This mono output cable is commonly used to send a single channel of audio from an Arrakis console or Simple IP node output out to an XLR-equipped device, things like a processor, an amplifier, a recording device, or another piece of studio gear that only accepts XLR male connections. Since it's mono, it's built for single-channel applications rather than full stereo pairs, making it a good fit for situations like feeding a mono output bus, connecting to a single mic preamp channel, or wiring up any other single-channel signal path in your studio. Because it's specifically an output cable, double-check your signal direction before ordering if you're not sure whether you need this cable or the corresponding input version, since Arrakis labels cables based on which direction the signal is traveling relative to the console. Why Purpose-Built Cabling Beats Generic Adapters Buying a cable designed specifically for this connector transition avoids the noise, wiring mistakes, and unreliable connections that can come from improvised adapters or generic cabling not built with Arrakis's specific RJ45 pin configuration in mind. Purpose-built cables like this one are part of what makes installing or expanding an Arrakis system considerably easier, since you're not left guessing at pinouts or troubleshooting connection issues that a properly matched cable would have avoided entirely. This matters even more in a broadcast environment, where a bad connection can mean dead air or a broken signal chain mid-show. Who Should Be Adding This Cable to Their Studio This cable is a practical purchase for anyone running an Arrakis console or Simple IP node who needs to send a mono output out to standard XLR-equipped equipment. It's especially useful for stations expanding their studio setup with outboard processors, amplifiers, or recording equipment that only accepts XLR connections, since this cable removes the need for custom wiring or generic adapters. For any facility already invested in the Arrakis ecosystem, having the correct purpose-built cable on hand makes connecting additional gear straightforward rather than a troubleshooting exercise.\u003c\/p\u003e","brand":"Arrakis","offers":[{"title":"Default Title","offer_id":50995706691831,"sku":"RJ45-XLR-3","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0422\/1291\/7402\/files\/arrakis-systems-logo_35e8caee-ab14-4c51-b9fc-f747a0603af3.jpg?v=1785795319","url":"https:\/\/www.305broadcast.com\/products\/arrakis-rj45-xlr-3-cable","provider":"305broadcast","version":"1.0","type":"link"}