{"product_id":"arrakis-xlr-rca-2-cable-pair","title":"Arrakis XLR-RCA-2 Cable Pair","description":"\u003ch1\u003e\u003cstrong\u003eArrakis XLR-RCA-2 Cable Pair\u003c\/strong\u003e\u003c\/h1\u003e\u003cp\u003eWhat This Arrakis XLR-RCA-2 Cable Pair Actually Is This is a stereo pair of XLR female to RCA male cables built for connecting consumer or semi-professional audio gear into professional broadcast equipment that uses standard XLR inputs. Since a lot of playback devices, computers, and consumer audio sources output RCA rather than XLR, this cable pair bridges that gap, letting you plug RCA-equipped sources directly into the XLR inputs found on broadcast consoles, mixers, and other studio gear. Being labeled as an input cable means it's designed specifically to bring an unbalanced RCA signal into a balanced XLR input, converting connector type in the process without you needing a separate adapter box. Sold as a matched stereo pair, you get both left and right channel cables in a single purchase, ready to handle a complete stereo connection rather than needing to source and match two cables separately. Why You'd Need an XLR to RCA Adapter Cable in a Studio Broadcast consoles and professional audio gear almost universally use balanced XLR connections for their inputs and outputs, but plenty of common studio sources, things like consumer media players, laptops, or older audio equipment, only offer unbalanced RCA outputs instead. Rather than needing a separate adapter or converter box sitting in your signal chain, this cable pair handles that connector mismatch directly, with XLR female connectors on one end to plug straight into your console's inputs and RCA male connectors on the other end to connect to your source device. Keep in mind that going from RCA to XLR doesn't magically make the signal balanced, since the source itself is still putting out an unbalanced signal, but this cable gets you a working physical connection between two otherwise incompatible connector types without extra hardware. How This Cable Fits Into a Typical Studio Setup This pair is commonly used for bringing external playback sources into a broadcast console, whether that's a CD player, a consumer audio interface, an older piece of studio gear, or any other RCA-equipped device you need connected into your on-air chain. Because it's labeled specifically as an input cable, it's built for the direction of bringing signal into your console rather than sending console output out to an RCA-equipped destination, so it's worth double-checking your signal flow before ordering if you're not sure which direction you need. Having the pair matched together keeps your left and right channel connections consistent, which matters for maintaining proper stereo balance when you're bringing in a two-channel source. This kind of cable tends to come in handy during studio buildouts, temporary setups, or whenever you're integrating a piece of gear that wasn't originally designed with professional XLR connections in mind. Where This Cable Pair Gets Used Most You'll typically reach for this pair when connecting things like consumer-grade media players, computer audio outputs, or legacy equipment with RCA jacks into a professional console's XLR inputs. It's a practical solution for stations bringing in outside audio sources that weren't built with broadcast connectivity in mind, letting you integrate that gear into your studio without needing to replace the source device or add a separate signal converter. Because RCA connections are still common on a lot of consumer and prosumer equipment, having this cable pair on hand gives you flexibility to connect a wider range of devices into your Arrakis console or any other XLR-equipped broadcast gear without scrambling for a workaround mid-session. Who Should Be Adding This Cable Pair to Their Studio This is a useful addition for any broadcast station, podcast studio, or production room that regularly needs to connect RCA-equipped consumer or semi-professional gear into a professional XLR-based console. It's particularly handy for stations bringing in outside media players, computer audio, or older equipment that was never built with broadcast-standard connectors in mind. Because it's sold as a matched stereo pair, it's a convenient option for anyone who wants a reliable, ready-to-use connection rather than piecing together mismatched cables or separate adapters. For studios running Arrakis consoles or any other gear with standard XLR inputs, this cable pair offers a simple way to bring in additional audio sources without added hardware in the signal path.\u003c\/p\u003e","brand":"Arrakis","offers":[{"title":"Default Title","offer_id":50995706953975,"sku":"XLR-RCA-2","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0422\/1291\/7402\/files\/arrakis-systems-logo_8c748ce4-748c-40c3-bd65-e481c659a64d.jpg?v=1785795353","url":"https:\/\/www.305broadcast.com\/products\/arrakis-xlr-rca-2-cable-pair","provider":"305broadcast","version":"1.0","type":"link"}