Horus Technologies SETH Jammer Tester — 70 MHz to 6 GHz
Inquire Price Directly
Horus Technologies SETH Jammer Tester — 70 MHz to 6 GHz
The Horus Technologies SETH is a portable jammer tester designed to verify the performance of active, reactive and hybrid jamming systems in field and laboratory environments. It provides automated measurements of reaction time, receiver sensitivity and RF output power within its 70 MHz to 6 GHz center-frequency operating range.
Housed in a rugged carrying case, SETH combines straightforward pass/fail indicators with detailed measurements accessible through an embedded Ethernet web server. Up to four programmable test profiles, each with up to 32 sequential test frequencies, support repeatable checks of different jammer configurations. An internal rechargeable battery and external AC/DC power options provide flexibility for field and bench use.
Key Features
-
Automated test sequences with green PASS and red FAIL indicators.
-
Eight 50-ohm RF connections with integrated power attenuation.
-
Programmable test profiles for different equipment types or configurations.
-
Time-stamped test results, measurement details and downloadable logs.
-
Password-protected web access with two permission levels.
Technical Specifications
| Specification | Details |
|---|---|
| Operating center-frequency range | 70 MHz to 6 GHz |
| Center-frequency setting resolution | 1 kHz |
| Supported test modes | Reactive, active and hybrid |
| RF connections | 8 × N-type female connectors, 50 Ω; TX, RX or combined TX/RX use |
| Maximum RF input power | 120 W per input, subject to total-power, duration and temperature limits |
| Programmable test profiles | Up to 4 |
| Sequential test frequencies | Up to 32 per profile |
| Generated test signals | CW, FM and QPSK with PRBS |
| Generated test signal level | −90 to −50 dBm in 1 dB steps, specified at the jammer receiving connector |
| FM deviation | 20 kHz to 2 MHz with 1 kHz modulation |
| Reaction-time measurement range | 100–10,000 µs (0.1–10 ms) |
| Reaction-time measurement resolution | 10–300 µs, depending on measurement bandwidth and integration-time settings |
| Power measurement bandwidth | 200 kHz to 51.2 MHz |
| RF power measurement range | 1–100 W (+30 to +50 dBm) within the selected measurement window |
| Power measurement resolution | Reactive mode: 1 dB; active mode: 0.1 dB |
| Power measurement integration time | 100 µs to 100 ms in active mode |
| Management interface | Embedded web server via Ethernet, RJ45 connection |
| Battery | Internal rechargeable battery |
| DC power supply | 9–24 VDC |
| AC power supply / charger | 90–264 VAC, 50/60 Hz; external unit included |
| Power consumption | ≤50 W |
| Dimensions | 464 × 366 × 176 mm |
| Weight | ≤10 kg, including battery, power supply and connecting cables |
| Specified operating temperature | −20°C to +50°C, excluding lithium batteries |
Standard Equipment
-
Eight 1.2 m RG223 double-braided RF cables, 50 Ω, with N-type male connectors.
-
External AC power supply/battery charger with mains cable.
-
Instruction manual.
-
Quick guide for field operators.
Optional Capabilities and Accessories
-
On-air testing using two separately supplied antennas.
-
Spectrum analysis.
-
Advanced self-test.
Contact us for configuration details and a customized quotation.