{"product_id":"sonifex-rb-sd1ip-silence-detection-unit-with-ethernet-usb","title":"Sonifex RB-SD1IP Silence Detection Unit With Ethernet \u0026 USB","description":"\u003ch2\u003e\u003cstrong\u003eSonifex RB-SD1IP Silence Detection Unit With Ethernet \u0026amp; USB\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"bold_para\"\u003eThe RB-SD1IP Silence detection unit is an upgraded version of the RB-SD1. The unit is a 1U rack mount device used to monitor an unattended stereo studio feed and in the event of the signal going “quiet” after a given period the unit will switch through an alternative stereo audio signal. This signal could be a recorded message (e.g. “Normal service will be resumed”, etc), a feed from a flashcard player, audio from a connected USB flash drive or an alternative recorded program. Controls are provided to start external equipment and to provide remote status indication.\u003c\/p\u003e\n\u003ch3\u003eNew Features:\u003c\/h3\u003e\n\u003cp\u003eThe RB-SD1IP offers all of the functionality of the standard RB-SD1 with several extra capabilities. Ethernet connectivity provides the ability to set up and control the unit via a browser based GUI. The network capabilities allow the user to more finely control silence level (-60dBu to 0dBu in 3dBu steps) and silence duration (1 second to 24 hours). You can also remotely lock\/unlock the front panel controls on the unit and opt to use either the hardware configured settings or web based settings. In addition to the front panel LEDs the GUI home page offers a real time view of signal levels and alarm statuses.\u003c\/p\u003e\n\u003cp\u003eUsing the new browser GUI, left and right channels can be treated independently and remote relay triggers can be configured as one of many events including the new GPIO pins. You can also choose to lock\/unlock the use of the remote pins to control the unit and firmware updates can also be performed using the web GUI.\u003cbr\u003eSNMP V1 is implemented so that the unit can be controlled by existing network management systems. The addition of 6 extra GPIO pins to the rear panel allows customisable functionality, including the use of the RB-SD1IP network interface to generate SNMP Traps on behalf of other, non-networked, hardware.\u003c\/p\u003e\n\u003cp\u003eThe RB-SD1IP has been fitted with a USB interface on the front panel and can act as a host in two ways. Firstly the USB port can be used to upgrade the firmware on the unit from a USB flash drive. Secondly, such a drive can hold a pre-recorded message which the unit can play out in the event that both main and auxiliary signals fall silent.\u003c\/p\u003e\n\u003cp class=\"para_filledbox\"\u003e\u003cspan class=\"bold_para\"\u003eKey Features of the RB-SD1IP\u003c\/span\u003e\u003cbr\u003eIP Enabled with Web Browser control interface.\u003cbr\u003eSNMP V1 Compatible.\u003cbr\u003eTrap generation for non-networked hardware via GPIO port.\u003cbr\u003eUSB Functionality.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.sonifex.co.uk\/images\/redbox\/rb-sd1ip_diagram_300dpi.jpg\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/www.sonifex.co.uk\/images\/redbox\/rb-sd1ip_diagram_598x366px.jpg\" width=\"598\" height=\"366\" alt=\"RB-SD1IP Diagram\"\u003e\u003c\/a\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable width=\"567\" border=\"0\" cellpadding=\"0\" cellspacing=\"0\" class=\"table02\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003ch2\u003eTechnical Specification For RB-SD1IP\u003c\/h2\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003ch4\u003eAudio Specification\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"136\"\u003eMaximum Input Level:\u003c\/td\u003e\n\u003ctd width=\"431\"\u003e+28dBu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Impedance:\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;100kΩ balanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Output Level:\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e+28dBu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Impedance:\u003c\/td\u003e\n\u003ctd\u003eAs input, except when using unbalanced auxiliary input where output impedance \u0026lt;50Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response:\u003c\/td\u003e\n\u003ctd\u003e20Hz - 20kHz ±0.1dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGain:\u003c\/td\u003e\n\u003ctd\u003e+8dB (for unbal input B - optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise:\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;-93dB, unity gain, ref +8dBu output for unbal input\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistortion:\u003c\/td\u003e\n\u003ctd\u003eAs input for balanced input, \u0026lt;0.02% @ 1kHz ref +8dBu output for unbalanced\u003cbr\u003einput\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003ch4\u003eRear Panel Connections and Controls\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs (Main \u0026amp; Auxiliary):\u003c\/td\u003e\n\u003ctd\u003e4 x XLR 3 pin female (balanced, auxiliary can be unbalanced)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput:\u003c\/td\u003e\n\u003ctd\u003e2 x XLR 3 pin male (balanced)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemotes:\u003c\/td\u003e\n\u003ctd\u003e15 way D-Type plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGPIO:\u003c\/td\u003e\n\u003ctd\u003e9 way D-Type socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlarm Threshold:\u003c\/td\u003e\n\u003ctd\u003e-15dBu to -60dBu in 3dB steps via rotary switch 0dBu to -60dBu in 3dB steps via web GUI\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSilence Detect Duration:\u003c\/td\u003e\n\u003ctd\u003e2 - 30 seconds in 2 second intervals \u0026amp; 125 second option via rotary switch\u003cbr\u003e1 second – 24 hours using web GUI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDetection Type:\u003c\/td\u003e\n\u003ctd\u003eMono or Stereo, via DIP switch Mono, Stereo, or dual mono via web GUI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSilence Switch Defeat:\u003c\/td\u003e\n\u003ctd\u003eDisable\/enable silence switching, via DIP switch or GUI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Start:\u003c\/td\u003e\n\u003ctd\u003eLatched or momentary, via DIP switch or GUI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet:\u003c\/td\u003e\n\u003ctd\u003e10\/100Mbps on 1xRJ45 socket with status LEDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMains Input:\u003c\/td\u003e\n\u003ctd\u003eFiltered IEC, continuously rated 85-264VAC @47-63hz 10W max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuse Rating:\u003c\/td\u003e\n\u003ctd\u003eAnti-surge fuse 1A 20 x 5mm (250VAC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003ch4\u003eFront Panel Controls and Indicators\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControls (With Indicators):\u003c\/td\u003e\n\u003ctd\u003eSource Select, Mode Select and Restore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndicator:\u003c\/td\u003e\n\u003ctd\u003eProgram and Alarm indicators for left and right source for both Main and Auxiliary channels, power indicator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReset:\u003c\/td\u003e\n\u003ctd\u003eRecessed push button\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB Port:\u003c\/td\u003e\n\u003ctd\u003e1 x USB A socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003ch4\u003eUSB\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eThe RB-SD1IP can act as a host for low powered USB Mass Storage devices in order to playback Audio files as an emergency backup system for when both Main and Auxiliary sources fail.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFile System(s):\u003c\/td\u003e\n\u003ctd\u003eFAT \u0026amp; FAT32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported Audio:\u003c\/td\u003e\n\u003ctd\u003e.wav extension (16 bit Stereo\u003cbr\u003ePCM @ 48KHz, 24KHz, 12KHz,\u003cbr\u003e44.1KHz, 22.050KHz, 11.025KHz,\u003cbr\u003e32KHz, 16KHz, 8KHz)\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eNote: Additional Audio support may be added in future updates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003ch4\u003eEquipment Type\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRB-SD1IP\u003c\/td\u003e\n\u003ctd\u003eSilence Detection Unit With Ethernet \u0026amp; USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003ch4\u003ePhysical Specification\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (Raw):\u003c\/td\u003e\n\u003ctd\u003e48cm (W) x 10.8cm (D) x 4.2cm (H) (1U)\u003cbr\u003e19” (W) x 4.3” (D) x 1.7” (H) (1U)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (Boxed):\u003c\/td\u003e\n\u003ctd\u003e58.5cm (W) x 22.5cm (D) x 7cm (H)\u003cbr\u003e23” (W) x 8.9” (D) x 2.8” (H)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight:\u003c\/td\u003e\n\u003ctd\u003eNett: 1.4kg  Gross: 2.0kg\u003cbr\u003eNett: 3.1lbs Gross: 4.4lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Sonifex","offers":[{"title":"Default Title","offer_id":49434494140663,"sku":"RB-SD1IP","price":1150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0422\/1291\/7402\/files\/rb-sd1ip_600px.jpg?v=1739794031","url":"https:\/\/www.305broadcast.com\/products\/sonifex-rb-sd1ip-silence-detection-unit-with-ethernet-usb","provider":"305broadcast","version":"1.0","type":"link"}