Staco Energy AVR-20WCSY015

$9,240.00 $8,085.00
(You save $1,155.00)

Staco AVR

Electro-Mechanical 120-600 Volt, up to 2500 kVA
Microprocessor controlled series regulation variable transformer topology designed with optional power conditioning elements including noise attenuation and SPD filters with 3-30 second full correction time.

Voltage Regulation & Power Conditioning

Problem: The quality of today's electrical power has become a major operating concern, especially for newer, high-tech equipment. Filters, surge suppressors and isolation transformers can solve many electrical problems. However, each sacrifices benefits if applied as a stand-alone solution.

Solution: When surge suppressors and isolation transformers are combined with a voltage regulator, such as one of our series of power line conditioners, the results provide an ideal solution to these power quality problems.

Our voltage regulators maintain a constant output voltage within ±1% or better, regardless of input voltage variations from +10% to-20% of the nominal input value in standard models. They are also designed and rated to meet standard industry kVA ratings for maximum application compatibility with both new and existing installations.

Their performance is guaranteed under all power factor conditions. It doesn't matter if the connected load is capacitive, resistive or inductive.

Staco Energy Products Co.'s voltage regulators are designed with maximum safety, ease of installation and efficiency in mind. Each model features a modular design, front accessibility and an enclosed, indoor, ventilated, drip-proof enclosure.

15 KVA Voltage Regulator system comprised of a motorized variable autotransformer, buck-boost transformers and an analog controller to position and maintain a customer selected output voltage setting.

Phase: Three
Input Voltage: 208Y/120
Input Configuration: Wye
Output Voltage: 208Y/120
Output Configuration: Wye
kVA Range: 0-19
Max kVA: 15
Frequency (Hz): 60Hz
Type: Voltage Regulator
Controller: Analog Input Set Point, Microprocessor (FRC)
Single Line Control / Individual Phase Control: Single Line Control
Input Range: +10%/-20%

Videos Hide Videos Show Videos