Arrakis ARC-HYB-2 Premade Cable

A Premade Mix Minus Cable Built For The H10 Console The Arrakis ARC-HYB-2 is a premade cable that converts the RJ45 mix minus connection on an H10 console into male and female XLR connectors, giving stations a direct and reliable way to connect an external phone hybrid to the board. The H10 is part of the Arrakis H Series line of hybrid consoles, and like other Arrakis boards, it uses balanced RJ45 connectors for its core wiring rather than traditional XLR jacks. Since most external phone hybrids are built around XLR connections, this cable exists specifically to bridge that gap so a hybrid can be wired into the H10's mix minus channel without custom cable work. Having both a male and female XLR end on the same cable means it handles both directions of that connection, sending audio out to the hybrid while also bringing the caller's audio back into the console. For any station setting up call-in functionality on an H10, this cable is the direct, purpose built way to get that connection working correctly. Why The Mix Minus Connection Requires Specific Wiring A mix minus feed is what allows a caller to hear the console's program audio without hearing their own voice looped back to them, which is essential for keeping phone calls sounding clean and free of echo on air. Getting that feed to a hybrid correctly requires wiring that matches both the console's connector type and the hybrid's expected input and output format. Because the H10 carries this mix minus signal over RJ45 while most hybrids expect XLR, a cable like the ARC-HYB-2 removes the need to figure out that conversion through generic adapters or custom-built wiring. This matters because a mismatched or improvised cable can introduce noise, signal loss, or an unreliable connection that shows up as call quality issues during a live broadcast. Using a cable engineered specifically for this exact purpose avoids that kind of troubleshooting after the console and hybrid are already in place. Built To Match H10 Wiring Standards Precisely Since the ARC-HYB-2 is designed specifically for the H10 console's mix minus channel, it eliminates the uncertainty that comes with sourcing a generic RJ45 to XLR cable from a different supplier. Broadcast wiring standards can vary between manufacturers even when the connector types look similar, so a cable that isn't built to match the H10's specific pin configuration can cause subtle problems that are difficult to trace after installation. By using a cable engineered around the exact standard the H10 was designed with, a station gets a connection that works correctly from the first time it's plugged in, without needing to test or adjust wiring during setup. This precision matters most during a new studio installation or when adding hybrid functionality to an H10 that wasn't originally wired for it. A Practical Time Saver During Studio Setup Ordering a premade cable like the ARC-HYB-2 is considerably faster than having station staff build a custom mix minus cable from scratch, particularly for stations without an engineer experienced in broadcast-grade cable termination. Because it's manufactured to match the H10's connector standards on one end and standard XLR equipment on the other, there's no need to verify continuity or adjust wiring after the fact. This is especially useful when a station is trying to get an H10 fully operational quickly, whether that's part of a new studio build or an addition to an existing setup that's bringing in phone hybrid capability for the first time. For any station that already knows it's pairing an H10 with an external hybrid, having this cable ready ahead of time avoids a wiring delay in the middle of installation. A Small But Necessary Piece Of A Complete H10 Setup On its own, the ARC-HYB-2 is a modest accessory, but it plays a specific and necessary role in getting call-in functionality working correctly on an H10 console. Anyone planning to connect an external phone hybrid to an H10 should include this cable in their initial equipment order rather than discovering the connector mismatch after the hybrid has already arrived. Because Arrakis offers a range of similar conversion cables built for other console and hybrid pairings, it's worth confirming this is the correct cable for an H10 specifically before ordering. For the cost of a simple cable, it removes a real point of friction in getting phone hybrid functionality working reliably from day one.