Arrakis RJ45-RJ45-1 Cable Pair

What This Arrakis RJ45-RJ45-1 Cable Pair Actually Is This is a mono pair of RJ45 male to RJ45 male cables built specifically to connect your Simple IP node to channels 1 and 2 of the ARC-MIC-PRE mic preamp. Since both the Simple IP node and the ARC-MIC-PRE use RJ45 connectors for their audio connections, this pair gives you a purpose-matched way to link the two pieces of equipment together without needing adapters or custom-built wiring. Being sold as a mono pair means you get two individual cables together in one purchase, each handling a single mono channel, specifically wired for connecting into preamp inputs 1 and 2. This is a targeted accessory cable meant for a very specific connection point in an Arrakis AoIP system, rather than a general-purpose cable for broader studio use. Why This Connection Exists in an Arrakis AoIP System The Simple IP node provides line-level inputs, which works fine for most audio sources but isn't sufficient on its own for connecting microphones directly, since mic signals need to be boosted to line level first through a proper preamp. The ARC-MIC-PRE exists specifically to solve that problem, converting two of your Simple IP line inputs into proper mic-level inputs so you can connect microphones directly into your AoIP system. This cable pair is what physically links those two devices together, carrying the signal from your Simple IP node into the first two channels of the ARC-MIC-PRE so the preamp can do its job before that signal continues on into your console. Without a cable built specifically for this connection, you'd be stuck improvising a link between two RJ45 devices that weren't necessarily designed with a generic cable in mind. How This Fits Into Your Broader Studio Setup If you're running microphones through a Simple IP node and want to add mic preamp capability using the ARC-MIC-PRE, this cable pair is the direct physical connection that makes that setup work. Since the ARC-MIC-PRE handles two mic channels at a time, having a matched mono pair means both of those channels are covered in a single purchase, rather than needing to separately verify and order two individual cables. This kind of purpose-built connection matters in broadcast environments where a mismatched or improvised cable could introduce noise, hum, or signal issues right at your microphone stage, which is exactly the point in your signal chain where clean audio matters most. Why a Purpose-Matched Pair Beats Generic RJ45 Cabling While RJ45 cables are common and inexpensive, not every RJ45 cable is wired the same way internally, and audio equipment using RJ45 connectors often relies on specific pin configurations that don't match standard networking cable wiring. Using a cable purpose-built for this exact connection, Simple IP to ARC-MIC-PRE channels 1 and 2, means you're not left guessing whether a generic cable will actually carry your mic signal correctly. This matters especially for broadcast studios, where an incorrect connection at this stage could mean a dead or distorted mic channel right when you need it live on air. Who Should Be Adding This Cable Pair to Their Studio This cable pair is specifically for anyone running a Simple IP node alongside an ARC-MIC-PRE preamp who needs a reliable, correctly wired connection between the two. It's a necessary purchase for stations adding microphone capability to their Simple IP setup through the ARC-MIC-PRE, since without a properly matched cable, the preamp simply can't receive its input signal correctly. For any studio building out an Arrakis AoIP system with microphone inputs, this is a small but essential piece of the overall signal chain.